Blue Horizons Chlorine Reducer can be used to lower Chlorine or Bromine levels in swimming pool water after shock treatment procedures or as a problem solver if the pool has been accidentally 'overdosed' with chlorine or bromine.
- Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10lts) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the pool whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution.
- If applying after a shock treatment, allow a minimum of 8 hours for shock chlorination to oxidise bather wastes from water before application.
- Measure the free chlorine/total bromine level in the water, then using the dosing table below, calculate the total amount required.
- Split this amount into 4 smaller doses. Apply each smaller dose, allowing time to thoroughly circulate (2-3 hours for commercial pools/6-8 hours for domestic pools) before re-testing chlorine/bromine level and if necessary adding further doses.
Blue Horizons Chlorine Reducer comes in a 1kg container.