Marquis Spa & Hot Tub Jetline & Pipework Cleaner clears hot tub, spa and jetted bath tub plumbing of organics, oils, dirt and minerals. Add Marquis Jetline & Pipework Cleaner before the water is drained to prevent build up that can restrict water flow and damage equipment. Jetline & Pipework Cleaner is compatible with all sanitisers including chlorine, bromine, ozone and biquanide.
Directions for use:
Use Marquis Jetline & Pipework Cleaner every 3 months or when the hot tub/spa is drained and refilled per the manufacturers recommendations.
- Remove filter cartridge and clean separately
- Before hot tub/spa is drained, add entire bottle of Jetline & Pipework Cleaner to warm hot tub/spa water through the skimmers
- Turn pump ON and run the jets for 15 minutes (ensure filter is removed)
- Turn jets OFF and let sit for 1 hour
- Turn jets ON and run for 15 minutes
- Drain the hot tub/spa hosing off the inside walls while draining. When empty rinse one last time
- Refill the hot tub/spa according to the manufacturers recommendations
Note: Some residual foaming may occur, if so, use a de-foamer to suppress the foam.
Marquis Jetline & Pipework Cleaner is a 473ml bottle.